How to choose the right board? - Bodyboard

Choosing a board

Choosing the best bodyboard for your height, weight and experience is very important. There's a huge difference between riding light or heavy and big or small boards. Have you tried two bodyboards in the same day and in the same wave conditions?

You'll certainly notice several things. The best bodyboard for you might not be the best bodyboard for your mate. With the help of our friends at The Bodyboard-Depot, let's see what really suits you. First of all, how do I know which board is a good size for me?

The bodyboard should either reach up to about your belly button when stood on the floor, or fit between your chin and the top of your knees when held in front of you.

The shorter the board the more your legs will be trailing in the water behind you, causing drag and slowing you down. If you surf in a variety of conditions and your wallet allows, your quiver should aim to have a bigger board for small waves, a normal-sized board for average waves, and a smaller board for big (or slabby) waves.

What are the different core materials and what do they do? The two main types of core material used today are dow polyethylene foam (PE) and polypropylene foam (PP). Dow has been used in bodyboard cores for decades, and although slightly heavier, offers superb flex, excellent projection and solid all-round performance when the water is colder.

Polypro boards are naturally lighter and stiffer than their dow cousins, but when stringered can be too stiff for many riders when the water is cold. Newer 3D cores incorporate both PE and PP foams in sandwiched layers.

What is the difference with tails? Tails are the last exit point for water leaving the bottom of the board and different shapes have different effects. The four main tails are based on those of the ‘crescent’ and ‘bat’ shape. A general rule is the wider a tail the more stable and faster it is, the narrower the tail the more maneuverable.

The clipped crescent tail is a popular and proven all-rounder, holding the rider into the wave face with predictable bite and reassurance. The full crescent tail has narrower tail pegs which increase control and help dropknee riders lock in their trailing fin to help with turns. The bat tail was designed by Mike Stewart, in the 1990s, and is much looser.

What is a rail? Rails are the edges of the bodyboard which plane through the face of the wave. The steeper the rail angle the more bite you will get, increasing your control, but reducing your drive. The shallower the angle, the faster the board will be due to less rail resistance, but harder it is to turn due to the decreased vacuum. Rails generally come in either 60/40 or 50/50 guise, both of which provide a good balance and rail angle of between 30 to 35 degrees.